User manuals are also updated regularly to support new features and improvements in software and firmware. All downloads are free for all customers.
05 SEP 2024
For creating and updating ATP test programs.
Supports AT5600, AT3600 + ATi . MS Windows 7 / 8 / 10 / 11, 32 bit + 64 bit.
Please uninstall previous AT Editor dotNET versions before installing.
Check after install that your Windows Firewall is not blocking editor.exe.
Please install separate USB drivers on this page if wishing to use AT56 with direct USB connection.
09 AUG 2023
Central test program server and results collection for AT Testers.
Supports AT5600, AT3600 + ATi . MS Windows 7 / 8 / 10 / 11, 32 bit + 64 bit.
Please uninstall previous AT Server dotNET versions before installing.
Check after install that your Windows Firewall is not blocking server.exe.
31 JAN 2024
For DC1000 and DC1000A. DC Bias sweep software to automate your testing for saturation.
Supports HP 4284A / Keysight E4980 / Tonghui TH283x / WK3260B / HIOKI IM3536, IM3533, 3533-01 LCR meters + new MANUAL MODE to allow any LCR to be used.
MS Windows 7 / 8 / 10 / 11, 32 bit + 64 bit.
11 Sep 2016
Driver installer for enabling AT Editor to AT5600 communications using direct PC USB port.
MS Windows 7 / 8 / 10 / 11, 32 bit + 64 bit.
10 DEC 2024
Firmware upgrade for AT5600 customers.
Key Updates: Mandatory for hardware version 400 and above for AT5600 units with serial numbers 1000112201393 and up, preparing it for future diagnostic updates.
Download to AT5600 using AT EDITOR over a direct USB-USB connection, not by RS232.
When upgrading firmware, please remove all other connections (including Ethernet) from the unit, except Mains and USB-B. Upgrade time is typically 15 minutes.
You can read the release notes for new features and general firmware update information.
Click here for download and firmware upgrade instructions.
12 AUG 2024
Free firmware upgrade for all AT5600 customers.
Download to AT5600 using AT EDITOR over a direct USB-USB connection, not by RS232.
When upgrading firmware, please remove all other connections (including Ethernet) from the unit, except Mains and USB-B. Upgrade time is typically 15 minutes.
See UPGRADE VIDEO for download instructions.
Read the release notes to discover new features and find general firmware update information.
16 AUG 2024
Issue 28 of the AT5600 user manual.
22 MAY 2024
Updated user manual for the new AT Editor dotNET software
22 Mar 2023
Updated user manual for the v4.1.8473 of the AT Server dotNET software
30 Jul 2021
The DC1000A full user manual
01 JUN 2024
The user manual for the AC Interface Fixture
18 May 2019
Guidance and advice on making your own test fixture using the Voltech Starter Fixture plate.
28 Feb 2020
Instructions for connecting the Voltech Interlock Cable with the Banner Light Curtain EZAC-R9-QE8.
04 Dec 2017
Supports AT5600 AT3600 & ATi. MS Windows 7 / 8 / 10 / 11, 32 bit + 64 bit.
Please uninstall any previous versions before installing.
Check after install that Windows Firewall is not blocking editor.exe.
Please install separate USB drivers on this page if wishing to use AT56 with direct USB connection..
10 Sep 2016
Supports AT5600, AT3600 + ATi . MS Windows 7 / 8 / 10 / 11, 32 bit + 64 bit.
Please uninstall any previous versions before installing.
Check after install that your Windows Firewall is not blocking server.exe.
03 Nov 2015
Supports AT3600 + ATi
(Does NOT support AT5600)
MS Windows XP / Vista / 7 / 8 / 10, 32 bit + 64 bit.
06 Oct 2015
Supports AT3600 + ATi
(Does NOT support AT5600)
MS Windows XP / Vista / 7 / 8 / 10, 32 bit + 64 bit.
20 Aug 2010
Supports calibration of AT3600 and ATi with the AT CAL fixture.
Runs under MS DOS.
NOTE: Win XP and Win 10 32 bit only.
10 Sep 2013
Please Note - AT3600 Firmware upgrades can only be performed with V3.xx of the AT Editor.
The new dotNET AT Editor V4.xx does NOT support AT3600 firmware upgrades.
6 Jul 2015
Please Note - ATi Firmware upgrades can only be performed with V3.xx of the AT Editor.
The new dotNET AT Editor V4.xx does NOT support ATi firmware upgrades.
12 May 2008
12 May 2008
18 Nov 2005
18 Nov 2021
Initial release of separate user manual for the Legacy AT Editor software V3.xx
29 Jul 2021
Initial release of separate user manual for the Legacy AT Server software V3.xx
20 Sep 2016
07 Sep 2020
For Calibration of AT3600 + ATi only